2015–1

Happy 2015. Vroot Rooting: Thl T6 pro and Landvo 550
Monday 5 January 2015
by philippe Vo cong tri
popularity : 14%

Hello,

Happy new year 2015.

I open the year with the new article topics: Android rooting for MTK chips.

I use Vroot to root THL T6 pro and Landvo 550. After the rooting I switch to SuperSu from Playstore (safer ?).

PNG – 229.7 kb PNG – 188.2 kb

Since I have quite a lot of drivers, I think this rar file will be a help:

Preloader drIver USB_Drivers_All-rar: https://docs.google.com/file/d/0B1x… . Install and reboot the PC.

Thanks to the many contributors on the web and Vroot guys.

Commentaires
Guitar: Feeling the void
Monday 30 March 2015
by philippe Vo cong tri
popularity : 1%

I don’t want to feel,

I don’t want to fill,

the void is around,

the void, my wound.

Feeling the void

Commentaires

My childhood in Saigon – Viêtnam
Friday 24 April 2015
by philippe Vo cong tri
popularity : 1%

Hôm nay, tôi sẽ cố gắng để viết tiếng Việt. Tôi đã ở Saigon từ năm 1954 đến năm 1962 (khoảng),nhà của Bà ngoại của tôi. Đã ở R chú và dì P, người Anh em họ 2 của tôi B và S. Chúng tôi đã không khá giả, nhưng chúng tôi đã được hạnh phúc trong khu phố của chúng tôi Tan dinh.

Tôi nhớ tiệc người lớn đã cho các gia đình và rất gần bạn bè…

Tôi đã có một số bạn bè để chơi và chiến đấu.

Tôi nhớ một lão già và cháu gái của mình, những người sống gần nhà. Buổi tối, ông nói với những câu chuyện hài hước và tuyệt vời.

Tôi nhớ một quý ông mà con trai mời chúng tôi để xem phim hoạt hình 8 mm, Walt Disney, Mickey chuột màu đen và trắng.

Tôi nhớ một cậu bé nhỏ, những người cho vay tôi truyện tranh, tunics màu xanh (tuniques bleus) của bạn, tôi nghĩ.

Tôi nhớ rằng tôi thường đi Trung Quốc hàng tạp hóa để mua đồ ngọt. Quý ông này là một lòng tốt chưa từng có.

PS: With the help of Bing translator. I correct somehow the translation as I think it is more correct (for me)

Commentaires

THL 4000 OTA update 2015.0319. Kitkat 4.4.2
Wednesday 13 May 2015
by philippe Vo cong tri
popularity : 1%

1- Intro:

Android THL 4000 (got it for a bargain presale, rooted originally) has been update by OTA, today. It’s still on KitKat 4.4.2, performance and stability fixing. Build 20150319xxxx.

Result: No more root access.

PNG – 104.4 kb

2- Root access:

I used Vroot (V1.7.9.2) package running on the win7 PC.
– Thl: Set USB debug on. Link USB cable to the PC port. and wait…

The Thl 4000 driver is detected as yunos.

After the root success: I can’t use SuperUser (chain fire): missing pieces and root shell disabled!

Click on Vroot Superuser icon (a horse figure), that’s OK.

Tried the terminal as root several times, before Vroot superuser shows up to ask permissions.

Thl reboot: reinstall superuser chainfire, clicked on it, Vroot superuser accepted as root app. The Superuser chain fire is found inside of Vroot Superuser window manager !).

I did the same maneuvers with framework (still on the Thl). Inside of Vroot superuser window manager, as well terminal as root).

– I browsed the web trying to see if anything like this has happened. There, I found an article on how to switch superuser (which is very recent).

– 2-1) Superuser chainfire OK.

– 2-2) Download a root browser app from play store. It asked root permission (chain fire responds). Delete Vroot Superuser apk in /system/apps. For some reasons, I had to grant root permission again to the root browser, before it could delete Vroot. Reboot Thl 4000. Everything seems to function as before.

– 3) Conclusions:

1st time I met this kind of problem. Thanks to the contributor on the web: http://andro-era.blogspot.ch/2015/0…

PS. I saw that vroot is now iroot and a apk could do the job on the smarphone.

Commentaires

My childhood in Saigon – Viêtnam
Friday 24 April 2015
by philippe Vo cong tri
popularity : 1%

Hôm nay, tôi sẽ cố gắng để viết tiếng Việt. Tôi đã ở Saigon từ năm 1954 đến năm 1962 (khoảng),nhà của Bà ngoại của tôi. Đã ở R chú và dì P, người Anh em họ 2 của tôi B và S. Chúng tôi đã không khá giả, nhưng chúng tôi đã được hạnh phúc trong khu phố của chúng tôi Tan dinh.

Tôi nhớ tiệc người lớn đã cho các gia đình và rất gần bạn bè…

Tôi đã có một số bạn bè để chơi và chiến đấu.

Tôi nhớ một lão già và cháu gái của mình, những người sống gần nhà. Buổi tối, ông nói với những câu chuyện hài hước và tuyệt vời.

Tôi nhớ một quý ông mà con trai mời chúng tôi để xem phim hoạt hình 8 mm, Walt Disney, Mickey chuột màu đen và trắng.

Tôi nhớ một cậu bé nhỏ, những người cho vay tôi truyện tranh, tunics màu xanh (tuniques bleus) của bạn, tôi nghĩ.

Tôi nhớ rằng tôi thường đi Trung Quốc hàng tạp hóa để mua đồ ngọt. Quý ông này là một lòng tốt chưa từng có.

PS: With the help of Bing translator. I correct somehow the translation as I think it is more correct (for me)

Commentaires

THL 4000 OTA update 2015.0319. Kitkat 4.4.2
Wednesday 13 May 2015
by philippe Vo cong tri
popularity : 1%

1- Intro:

Android THL 4000 (got it for a bargain presale, rooted originally) has been update by OTA, today. It’s still on KitKat 4.4.2, performance and stability fixing. Build 20150319xxxx.

Result: No more root access.

PNG – 104.4 kb

2- Root access:

I used Vroot (V1.7.9.2) package running on the win7 PC.
– Thl: Set USB debug on. Link USB cable to the PC port. and wait…

The Thl 4000 driver is detected as yunos.

After the root success: I can’t use SuperUser (chain fire): missing pieces and root shell disabled!

Click on Vroot Superuser icon (a horse figure), that’s OK.

Tried the terminal as root several times, before Vroot superuser shows up to ask permissions.

Thl reboot: reinstall superuser chainfire, clicked on it, Vroot superuser accepted as root app. The Superuser chain fire is found inside of Vroot Superuser window manager !).

I did the same maneuvers with framework (still on the Thl). Inside of Vroot superuser window manager, as well terminal as root).

– I browsed the web trying to see if anything like this has happened. There, I found an article on how to switch superuser (which is very recent).

– 2-1) Superuser chainfire OK.

– 2-2) Download a root browser app from play store. It asked root permission (chain fire responds). Delete Vroot Superuser apk in /system/apps. For some reasons, I had to grant root permission again to the root browser, before it could delete Vroot. Reboot Thl 4000. Everything seems to function as before.

– 3) Conclusions:

1st time I met this kind of problem. Thanks to the contributor on the web: http://andro-era.blogspot.ch/2015/0…

PS. I saw that vroot is now iroot and a apk could do the job on the smarphone.

Commentaires

Pour la gloire de …
Saturday 23 May 2015
by philippe Vo cong tri
popularity : 1%

Oh miroir, si tu me dis ce qui ne me plaît pas, je te casse … 😉

Commentaires
Pour la gloire de …
Saturday 23 May 2015
by philippe Vo cong tri
popularity : 1%

Oh miroir, si tu me dis ce qui ne me plaît pas, je te casse … 😉

Commentaires

Guitar: Feeling the void
Monday 30 March 2015
by philippe Vo cong tri
popularity : 1%

I don’t want to feel,

I don’t want to fill,

the void is around,

the void, my wound.

Feeling the void

Commentaires

A little mild madness, what do you think ?
Thursday 25 June 2015
by philippe Vo cong tri
popularity : 1%

– What’s a heck of madness,
– mild mind to kill havoc,
– hard mind to play the rock,
– which one to choose you guess.

Commentaires

Wifi Brother DCP-J140W printer setup (Linux&Windows7)- print from Linux/android/Windows7
Saturday 1 August 2015
by philippe Vo cong tri
popularity : 1%

1) Intro:

First time I setup a Wifi printer at home. I use my daughter printer.

A friend asked to help to “repair” his wifi printer connection. I encountered “problems” and so unable to resolve. So I try to understand what’s going on.

Here are the results. Mainly for my own usage.

– (2-a) Wifi by WPS
– (2-c) Wifi fixed IP
– (2-d) Wifi print with Android smartphone
– (2-e) Wifi print with Windows7

2) Setup (Linux Debian Wheezy):

2-a WPS

a-1 Printer panel: Menu->Network->WPS activate->Wizard->Found SSID “Myrouter”->WPS rtr (here do not choose ok yet)

a-2 “Myrouter”-> Push wifi button 5s, the blue light blinks

a-3 Printer panel: OK-> configuration message-> done or someting like that.

a-4 Check printer really detected in the network SSID “Myrouter”: I use Fing with my android smartphone: it shows BRW00xxx 192.168.1.108

b-1 USB Print check in Debian:

– Download driver bundle from Brothe linux web site. Install the whole.
– Link the printer via USB
– http://localhost:631
– admin
– Add printer (DCP-J140W) and activate it
– Check port: USB something
– Print a test page.

b-2 Wifi Print check in Debian:
– in localhost:631: Administration->Modidy printer->Network->Ipp
– Print test page.
– Disconnect USB from printer, print a test page

b-2

PNG – 104.1 kb

PNG – 115.4 kb

2-c Wifi fixed Ip:

– “Myrouter” 192.168.1.1
– Add device: hostname (BRxxxx), Mac addresse, 192.168.1.200
– Print a test page and check with Fing on smartphone: Nothing happens.

– Printer setup:menu->Network->TCPIP->Fixed->192.168.1.200->255.255.255.0->bridge/router 192.168.1.1-> name BRxxxx (I left as it was with WPS).

– The previous print job is accepted now. Check Fing.

(Thanks to a contributor in Swisscom forum, for the fixed IP tips)

2-d Wifi Print with Android smartphone:

– Install from playstore: Brother iPrint&Scan 2.0.3. Should not have major problem to use.

PNG – 43.8 kb

PS: I will describe for Windows 7 later.

2-e Wifi printer with Windows7

– As I don’t have the original cdrom install, I download a driver bundle from Brother web site for winfows 7 (Mfl pro ?) .

– Connect the printer by USB
– Windows detect it
– Check print -> KO. No communications.
– Install the bundle form Brother.
– Delete the printer.
– Do manual install, add printer, choose dcp-j140w.Continue. At the end, print test page->OK.
– Click on newly installed printer. Screen from Brother shows up. Click tasks. Int asks print a test page->OK. Properties: Port USB.

– Take out the USB cable.

– Add printer->Choose network wifi or bluetoth-> Gives a list of available printer->choose printer as 192.168.1.108 (as the first time pairing by WPS). Configuration takes a while.
– Click on the newly installed printer->A screen from Brother shows up with items. Choose Tasks (1st item). From there print test page->OK. Properties: shared, port:192.168.1.108/TCPIP standard.

2-e-1 Wifi printing with fixed IP address
– Menu->Config panel->display devices and printers
– Add printer->Network->Listing of printers-> Choose 192.168.1.200->Continue->Configuration takes a while. Shows DCP-J140W(Copiex)-> Ready.
– Click on other screen, Continue till finish. Use as default.
– Click on newly installed printer. A screen from Brother shows up. Choose tasks (1st item). From there ,Print test page-> OK. Properties: shared, port shows WSD-xxxxx/WSD

Images will come.

Next step: windowsprinter sharing

Thanks to web anonymous people for hints and tips.

PNG – 225.1 kb

PNG – 245.5 kb PNG – 190.9 kb

PNG – 206.6 kb

Commentaires

Wifi Brother DCP-J140W printer setup (Linux&Windows7)- print from Linux/android/Windows7
Saturday 1 August 2015
by philippe Vo cong tri
popularity : 1%

1) Intro:

First time I setup a Wifi printer at home. I use my daughter printer.

A friend asked to help to “repair” his wifi printer connection. I encountered “problems” and so unable to resolve. So I try to understand what’s going on.

Here are the results. Mainly for my own usage.

– (2-a) Wifi by WPS
– (2-c) Wifi fixed IP
– (2-d) Wifi print with Android smartphone
– (2-e) Wifi print with Windows7

2) Setup (Linux Debian Wheezy):

2-a WPS

a-1 Printer panel: Menu->Network->WPS activate->Wizard->Found SSID “Myrouter”->WPS rtr (here do not choose ok yet)

a-2 “Myrouter”-> Push wifi button 5s, the blue light blinks

a-3 Printer panel: OK-> configuration message-> done or someting like that.

a-4 Check printer really detected in the network SSID “Myrouter”: I use Fing with my android smartphone: it shows BRW00xxx 192.168.1.108

b-1 USB Print check in Debian:

– Download driver bundle from Brothe linux web site. Install the whole.
– Link the printer via USB
– http://localhost:631
– admin
– Add printer (DCP-J140W) and activate it
– Check port: USB something
– Print a test page.

b-2 Wifi Print check in Debian:
– in localhost:631: Administration->Modidy printer->Network->Ipp
– Print test page.
– Disconnect USB from printer, print a test page

b-2

PNG – 104.1 kb

PNG – 115.4 kb

2-c Wifi fixed Ip:

– “Myrouter” 192.168.1.1
– Add device: hostname (BRxxxx), Mac addresse, 192.168.1.200
– Print a test page and check with Fing on smartphone: Nothing happens.

– Printer setup:menu->Network->TCPIP->Fixed->192.168.1.200->255.255.255.0->bridge/router 192.168.1.1-> name BRxxxx (I left as it was with WPS).

– The previous print job is accepted now. Check Fing.

(Thanks to a contributor in Swisscom forum, for the fixed IP tips)

2-d Wifi Print with Android smartphone:

– Install from playstore: Brother iPrint&Scan 2.0.3. Should not have major problem to use.

PNG – 43.8 kb

PS: I will describe for Windows 7 later.

2-e Wifi printer with Windows7

– As I don’t have the original cdrom install, I download a driver bundle from Brother web site for winfows 7 (Mfl pro ?) .

– Connect the printer by USB
– Windows detect it
– Check print -> KO. No communications.
– Install the bundle form Brother.
– Delete the printer.
– Do manual install, add printer, choose dcp-j140w.Continue. At the end, print test page->OK.
– Click on newly installed printer. Screen from Brother shows up. Click tasks. Int asks print a test page->OK. Properties: Port USB.

– Take out the USB cable.

– Add printer->Choose network wifi or bluetoth-> Gives a list of available printer->choose printer as 192.168.1.108 (as the first time pairing by WPS). Configuration takes a while.
– Click on the newly installed printer->A screen from Brother shows up with items. Choose Tasks (1st item). From there print test page->OK. Properties: shared, port:192.168.1.108/TCPIP standard.

2-e-1 Wifi printing with fixed IP address
– Menu->Config panel->display devices and printers
– Add printer->Network->Listing of printers-> Choose 192.168.1.200->Continue->Configuration takes a while. Shows DCP-J140W(Copiex)-> Ready.
– Click on other screen, Continue till finish. Use as default.
– Click on newly installed printer. A screen from Brother shows up. Choose tasks (1st item). From there ,Print test page-> OK. Properties: shared, port shows WSD-xxxxx/WSD

Images will come.

Next step: windowsprinter sharing

Thanks to web anonymous people for hints and tips.

PNG – 225.1 kb

PNG – 245.5 kb PNG – 190.9 kb

PNG – 206.6 kb

Commentaires
===
WIFI Share and print Linux/Windows 7/Android Kitkat
Monday 3 August 2015
by philippe Vo cong tri
popularity : 1%

1) Intro:

I put down the “experience” of wifi sharing between Debian Wheezy/Windows 7 (starter)/android kitkat.

This follows the previous article on wifi printing.

– 2) Sharing Debian Wheezy: shutdown firewall
– 2-1) Sharing xxx-PC: shutdown firewall
– 2-2)Sharing test on android kikat

– 3) Printserver on Debian
– 3-1 Debian printserver: with samba
– 3-2 Shareprinter test on Kitkat: No luck.
– 4) Conclusions: link, config files

2) Sharing Debian Wheezy: shutdown firewall

I use mainly my Acer netbook.

– #apt-get install samba client-samba (latest version)
– #vi /etc/samba/smb.conf. The minimum configuration.
– #testparm. To see if it’s ok.
– #/etc/init.d/samba restart

netbios name: debianserver workgroup: WORKGROUP

2-1) Sharing xxx-PC: shutdown firewall

I use Asus netbook.

– Click on network: shows “debianserver” (give username and password).

– Click on “debianserver”->shows the Debian directory.

– Share windows directory: Network->click on MyPc-> Choose sharing option (for me specific user). If required enter username (before that must configure as residential with advanced network item).

– On Debian: filemanager->network->shows “debianserver” and “philippe-pc”->click on “XXX -pc”->Ignore errormessage: shows the dir tree->click on share “philippe”-> enter username/password->shows the files in folders.

2-2)Sharing test on android kikat:

I use EsPlorer3 app. Latest version
– Click local network
– Click on detect -> shows “debianserver”
– Click on “debianserver” -> shows the tree on Debian -> Click back ->Click property of “debianserver”-> enter username/password of the debian user.
– Now click “debianserver”->click on the declared share directory (philippe)->OK.

Test files transfer-> OK.

3) Printserver on Debian:

A have an “old” dcp-167c printer, to use with usb cable. I use it since some years. The setup printer name is dcp167c.

I want to print as a sharedprinter.

3-1 Debian printserver: with samba (smb printer.-> once setup as in (2) -> Check on windows 7: -> Add printer -> Network wifi bluetooth-> Click on my printer is not on the list->Click search by hostname-> enter \\Debianserver\dcp167c->continue->Shows dpc167c on Debianser-> Or detetected and try to install driver (hopefully I have installed the printer driver before by downloading from Brother Linux web site; the printer with usb worked eons ago) -> OK -> Print test page, sending job to Debianserver-> OK.

3-2 Shreprinter test on Kitkat: No luck.

I just remember that I setup Google cloud print in 2013.

– On my smartphone->install Google cloud print app -> Parameters-> Printing-> Enabale Google cloud print -> Shows the printer dpc167c as installed on Debian.

– (How to install Cloud print on Debian ?) -> Install chromium -> Open Chromium and make connexion with same account as in my smartphone-> Open option printers (or put cloud in search box).

– Caveat: On smartphone kitkat, some apps do not have print function, I have to rely on third paarty print apps to be able to print on cloud !

Hopefully there are tutorials on the web to sort out the problem.

PNG – 95.2 kb

PNG – 90.5 kb

PNG – 79.7 kb

PNG – 135.4 kb ============================================== 4) Conclusions:

– Make sure I have to turn on my firewall.

I rely on tutorials on the web particularly: http://debianhelp.co.uk/samba.htm

Thanks to many web contributors for hints, tricks, tips.

– A copy of terminal session for samba:

root@dynamic:/etc/samba# vi smb.conf

root@dynamic:/etc/samba# testparms

bash: testparms : commande introuvable

root@dynamic:/etc/samba# testparm

Load smb config files from /etc/samba/smb.conf

rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)

Processing section “[homes]”

Processing section “[mydir]”

Unknown parameter encountered: “guest pk”

Ignoring unknown parameter “guest pk”

Processing section “[printers]”

Processing section “[print$]”

Loaded services file OK.

Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

[global]

server string = %h server

map to guest = Bad User

obey pam restrictions = Yes

pam password change = Yes

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew \s*\spassword:* %n\n *password\supdated\ssuccessfully* .

unix password sync = Yes

syslog = 0

log file = /var/log/samba/log.%m

max log size = 1000

dns proxy = No

usershare allow guests = Yes

panic action = /usr/share/samba/panic-action %d

idmap config * : backend = tdb

[homes]

comment = Home Directories

valid users = %S

read only = No

create mask = 0775

directory mask = 0775

browseable = No

[mydir]

path = /home/philippe

read only = No

locking = No

[printers]

comment = All Printers

path = /var/spool/samba

create mask = 0700

printable = Yes

print ok = Yes

browseable = No

[print$]

comment = Printer Drivers

path = /var/lib/samba/printers

root@dynamic:/etc/samba# vi smb.conf

root@dynamic:/etc/samba# testparm

Load smb config files from /etc/samba/smb.conf

rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)

Processing section “[homes]”

Processing section “[mydir]”

Processing section “[printers]”

Processing section “[print$]”

Loaded services file OK.

Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

[global]

server string = %h server

map to guest = Bad User

obey pam restrictions = Yes

pam password change = Yes

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

unix password sync = Yes

syslog = 0

log file = /var/log/samba/log.%m

max log size = 1000

dns proxy = No

usershare allow guests = Yes

panic action = /usr/share/samba/panic-action %d

idmap config * : backend = tdb

[homes]

comment = Home Directories

valid users = %S

read only = No

create mask = 0775

directory mask = 0775

browseable = No

[mydir]

path = /home/philippe

read only = No

locking = No

[printers]

comment = All Printers

path = /var/spool/samba

create mask = 0700

printable = Yes

print ok = Yes

browseable = No

[print$]

comment = Printer Drivers

path = /var/lib/samba/printers

root@dynamic:/etc/samba# cd /etc/samba

root@dynamic:/etc/samba# /etc/init.d/samba restart

[ ok ] Stopping Samba daemons: nmbd smbd.

[ ok ] Starting Samba daemons: nmbd smbd.

root@dynamic:/etc/samba# vi smb.conf

root@dynamic:/etc/samba# testparm

Load smb config files from /etc/samba/smb.conf

rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)

Processing section “[homes]”

Processing section “[mydir]”

Processing section “[printers]”

Processing section “[print$]”

Loaded services file OK.

Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

[global]

server string = %h server

map to guest = Bad User

obey pam restrictions = Yes

pam password change = Yes

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

unix password sync = Yes

syslog = 0

log file = /var/log/samba/log.%m

max log size = 1000

dns proxy = No

usershare allow guests = Yes

panic action = /usr/share/samba/panic-action %d

idmap config * : backend = tdb

[homes]

comment = Home Directories

valid users = %S

read only = No

create mask = 0775

directory mask = 0775

browseable = No

[mydir]

path = /home/philippe

valid users = philippe

read only = No

locking = No

[printers]

comment = All Printers

path = /var/spool/samba

create mask = 0700

printable = Yes

print ok = Yes

browseable = No

[print$]

comment = Printer Drivers

path = /var/lib/samba/printers

root@dynamic:/etc/samba# /etc/init.d/samba restart

[ ok ] Stopping Samba daemons: nmbd smbd.

[ ok ] Starting Samba daemons: nmbd smbd.

root@dynamic:/etc/samba# vi smb.conf

root@dynamic:/etc/samba# testparm

Load smb config files from /etc/samba/smb.conf

rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)

Processing section “[homes]”

Processing section “[mydir]”

Processing section “[printers]”

Processing section “[print$]”

Loaded services file OK.

Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

[global]

netbios name = DEBIANSERVER

server string = %h server

map to guest = Bad User

obey pam restrictions = Yes

pam password change = Yes

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

unix password sync = Yes

syslog = 0

log file = /var/log/samba/log.%m

max log size = 1000

dns proxy = No

usershare allow guests = Yes

panic action = /usr/share/samba/panic-action %d

idmap config * : backend = tdb

[homes]

comment = Home Directories

valid users = %S

read only = No

create mask = 0775

directory mask = 0775

browseable = No

[mydir]

path = /home/philippe

valid users = philippe

read only = No

locking = No

[printers]

comment = All Printers

path = /var/spool/samba

create mask = 0700

printable = Yes

print ok = Yes

browseable = No

[print$]

comment = Printer Drivers

path = /var/lib/samba/printers

root@dynamic:/etc/samba# /etc/init.d/samba restart

[ ok ] Stopping Samba daemons: nmbd smbd.

[ ok ] Starting Samba daemons: nmbd smbd.

root@dynamic:/etc/samba# smbclient -L //debianserver -U philippe

Enter philippe’s password:

Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.6]

Sharename Type Comment ——— —- ——-

mydir Disk

print$ Disk Printer Drivers

IPC$ IPC IPC Service (dynamic server)

Brother_DCP-J140W Printer Brother DCP-J140W

DCP167C Printer DCP167C

PDF Printer PDF

DCP-167C Printer Brother DCP-167C

philippe Disk Home Directories

Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.6]

Server Comment

——— ——-

DEBIANSERVER dynamic server

Workgroup Master

——— ——-

WORKGROUP DEBIANSERVER

root@dynamic:/etc/samba#

================================================== The smb.conf:

#

# Sample configuration file for the Samba suite for Debian GNU/Linux.

#

#

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options most of which

# are not shown in this example

#

# Some options that are often worth tuning have been included as

# commented-out examples in this file.

# – When such options are commented with “;”, the proposed setting

# differs from the default Samba behaviour

# – When commented with “#”, the proposed setting is the default

# behaviour of Samba but the option is considered important

# enough to be mentioned here

#

# NOTE: Whenever you modify this file you should run the command

# “testparm” to check that you have not made any basic syntactic

# errors.

# A well-established practice is to name the original file

# “smb.conf.master” and create the “real” config file with

# testparm -s smb.conf.master >smb.conf

# This minimizes the size of the really used smb.conf file

# which, according to the Samba Team, impacts performance

# However, use this with caution if your smb.conf file contains nested

# “include” statements. See Debian bug #483187 for a case

# where using a master file is not a good idea.

#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP

netbios name = debianserver

# server string is the equivalent of the NT Description field

server string = %h server

# Windows Internet Name Serving Support Section:

# WINS Support – Tells the NMBD component of Samba to enable its WINS Server

# wins support = no

# WINS Server – Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

# What naming service and in what order should we use to resolve host names

# to IP addresses

; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the

# ’interfaces’ option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself. However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = yes

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine

# that connects

log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).

max log size = 1000

# If you want Samba to only log through syslog then set the following

# parameter to ’yes’.

# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.smbd,nmbd instead. If you want to log

# through syslog you should set the following parameter to something higher. syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# “security = user” is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# /usr/share/doc/samba-doc/htmldocs/Samba3- HOWTO/ServerType.html

# in the samba-doc package for details.

security = user

# You may wish to use password encryption. See the section on

# ’encrypt passwords’ in the smb.conf(5) manpage before enabling. encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.

passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.

unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan < for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\ n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # ’passwd program’. The default is ’no’. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the ’domain master’ setting to no # ; domain logons = yes # # The following setting only takes effect if ’domain logons’ is set # It specifies the location of the user’s profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user’s home directory # (this is Samba’s default) # logon path = \\%N\%U\profile # The following setting only takes effect if ’domain logons’ is set # It specifies the location of a user’s home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if ’domain logons’ is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in ’DOS’ file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser —quiet —disabled-password —gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup —force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you’ll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c ’/usr/bin/linpopup "%f" "%m" %s; rm %s’ & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to ’no’; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you’re not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who’ve been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= [homes] comment = Home Directories browseable = no # By default, the home directories are exported read-only. Change the # next parameter to ’no’ if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. # The following parameter makes sure that only "username" can connect # to \\server\username # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [mydir] readonly = no locking = no path=/home/philippe valid users = philippe guest ok = no [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace ’lpadmin’ with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server’s CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don’t want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom - Commentaires How to unbrick Android Caesar A9600 Wednesday 26 August 2015 by philippe Vo cong tri popularity : 1% (Upd August/28/2015) Hello, 1) Intro: This cookbook article is mainly written for me to remember. I bought the Caesar with android 4.2.x, I rooted it with MTKdroidtools. I soft bricked it, last year, trying to upgarde to Kikat; I managed to flash a russian ROM 4.2.x, rooted and I wanted to install original rom firmware. Last week I bricked the smartphone (rooted), after succesfully install TWRP Zp910 and tried to upgrade it to 4.2 (for ZP910) . No more usb driver detected, no red light steady light charging ... >Dead…

I tried to use the testpoint technics, my grandson (91/2 years old), help me to dismount the frame to get onto the board, to no avail; In fact he has found the right screwdriver bit and unscrewing all of them and he also reminded me the K point label that I was looking for days (sharp mind isn’t he ? 🙂 ). Not really dead, I checked the battery with a mutimeter: gave 1,5 v. With Smartphone (battery insert), I checked live points on the board, there were juice.

The main interesting effect: PC Devices configuration shows Alcatel single RNDIS driver, switched on/off (the smartphone has battery inserted), when smartphone is connected to the pc.

Here is the exprience how to unbrick the thing. Thanks to much hints, tricks from people on the web and forii.

I am using Netbook Asus with Win7 starter.

2) Steps:
2-1)
– Download latest sp-flashtool, v5-1352.01, install it.
– Download from needrom.com: A9600-official-130319, unzip it
– Download MT65xx_usb_driver ; make sure that’s the right one for MT6589 and if possible for CaesarA9600, Zp910 etc … I have to find the web link on my other cheap smarphone,

– Uninstall Alcatel single RNIS from the PC. Reboot the pc.
– Insert the smartphone usb, with battery. Wait a moment, a click sound from the pc will be heard: win7 tries to install driver on a popup window, stopped it windows update …
– Wait a moment, Win7 will search on the pc the correct driver: vcom and will install it without error.

2-2)
– Disconnect the smartphone from the PC.
– Run Sp-flashtool
– Choose the scatter file (A9600-official), in the 2nd row
– Once scatter file loaded, all stick boxes showld be ticked
– Click download button
– Hold smartphone Volume+ and insert usb cable to pc usb port.
– Unhold smartphone volume+.
– Wait a moment, the PC will detect smartphone as COM/LPT: Vcom port 12 or 13 whatever.
– Wait a moment, the sp-flashtool will start to download data to the smartphone, yellow color bar progress shown on lower part.
– When 100% download, without error, a popup window with green symbol and OK will be shown.
– Discounnect the usb cable, wait for the sound from pc, reinsert it back. Now the smartphone driver will jitter on the pc devices configuration panel, I can see drives E F briefly, then YunOS will be shown at the end of devices configuration screen.
– Red steady light charging shown on Caesar A9600, I can see the battery image jittering on the screen .

– It’s alive. WELCOME Back …

2-3
– After a night wall charging, the Caesa rchecking gives 4.1.2 version. English version.

– Screen captures will be shown below.

Flashing: PNG – 246.7 kb


K testpoint ? PNG – 707 kb

Dismantled: PNG – 441.7 kb

Original Rom: PNG – 406.4 kb

ps: The testpoint is on a screw hole, down right (I think), the smatphone has a tiny label with K symbol, which covers the head of the screw. (???) We had to scratch the label in order to take out the screw.

Links:

http://forum.xda-developers.com/sho…

http://www.chinaphonearena.com/foru…

http://www.chinaphonearena.com/foru…

http://forum.frandroid.com/topic/14…

– mt65xx_usb_driver: http://www.gleescape.com/posts/2376

– mt65xx_usb_driver files: (i have a lot of drivers on the PC, not sure this could be vcom, but at least Yunos)

– amd64

– i386
— WdfCoInstaller01009.dll
— winusbcoinstaller2.dll
— WUDFUpdate_01009.dll
— notice

– androidwinusb86.cat

– android_winusb.inf

– androidwinusba64.cat

– source.properties

Commentaires

Va donc comprendre!
Friday 25 September 2015
by philippe Vo cong tri
popularity : 1%

Comprends plus rien

Le mal ou le bien

m’entoure d’un linceul

de pleurs du veule.

Hurle guitare !

Cris barbares

Prépare la guerre

Repousse l’enfer.

Siswoo c55 twrp&root&Xposed testing
Tuesday 6 October 2015
by philippe Vo cong tri
popularity : 1%

Update: 08/Oct/2015

1) Intro:

After hesitating a long time, and googling the forii, I have jumped to root the thing. Thanks to:

TWRP:

– http://forum.siswoo.com/forums/topi…

CWM:

– http://forum.xda-developers.com/and…

Xposed lollipop:

– http://forum.xda-developers.com/sho…

Other forii discussing about SP flashtool version for MTK67xx, lollipop.

2) Install: With Windows 7. Be sure the mobile battery is charged enough. Put SuperSu_pro_v2.49 on sdcard1 (internal)

– SP Flashtool 5.1520.00.000
– USB and Vcom drivers: I have plenty of them.

– a) Turn off C55, take the out the back cover. Plug in the USB cable.
– b) Plug mobile USB cable into pc port.
– No visible Vcom displayed under com&LPT (Windows peripheral configuration panel).

ps: with former installs, Preloader Vcom (com5) was shown. SP Flash < 5.1520.00.000 didn’t download executed. When taking off battery and backing in quickly, error showing something like: mobile switches on too early ... - c) Launch SP Flash exe - d) Load TWRP scatter file - e) Item recovery must be checked and its image path shown - f) Check Download only - g) Click on Download icon - h) Take battery off the mobile and reinsert it back quickly - i) The SP Flashtool, at the bottom screen, will start to download, see the red bar progression, then turns yellow into progression ... When finished successfully, a popup window will be shown with a green sign. - j) Take out mobile, plug a otg cable into mobile, at the oth other end of otg cable, plug a usb mouse. - k) mobile: Press Vol+ and power to go into recovery. Highligh recovery item with volume+, press volume- and wait for twrp. In twpr, one must use the mouse to navigate among menu items. - l) Choose install from twrp menu, with the mouse choose SuperSu_pro_v2.49. on sdcard1. I ignore error msgs. - m) Once super su installed, reboot system. - n) Checkroot. - o) I install busybox from play store. - p) I have installed Xposed framework (cf XDA Xposed): - From TWRP: XposedUninstaller-2015-08-31-arm64.zip, Xposed-v74-sdk22-arm64.zip. After the installation, takes time for configuration, at least 3 reboots in TWRP to finish. Reboot system. - Mobile up: - - XposedIntaller-3.0-alpha4.apk, apk installer (enable unknown source — Launch Xposed framework (Icon), soft reboot — Launch Xposed framework, configure Xposed privacy module, reboot. — After reboot, launch Xposed privacxŷ to configure Privacy. JPEG - 107.4 kb twrp JPEG - 86.1 kb files to flash (sdcard) (supersu,xposed) PNG - 180.5 kb PNG - 191.7 kb

PNG – 94 kb

Commentaires

Android Stagefright & other vulnerabilities – temporary solutions.Upd 16112015,26112015,25122015,26122015,20042016 (p8 solved)
Friday 6 November 2015
by philippe Vo cong tri
popularity : 13%

This article is mainly for me. Upd 12/11/2015, Mlais MX base. 16/11/2015, Oukitel U8. Huawei p8 26/11/2015, Samsung gt-i9001 26/12/2015. Huawei P8 v6 OK 20042016

1) Intro:

I came across the Stagefright vulnerabilities only 2 weeks ago 🙁 .

Since then, my effort is concentrating on trying to patch my smartphones, which are cheap, mostly based on MTK65xx/MTK67XX Socs.

Thanks to XDA and other forii for sharing their findings and solutions.

(Upd 26122015). I put other vulnerabilities in this same article: aka How to detect and figure out security patches: Firewall, VTS for Android …

Here are what I found.

2) Checking:

I use stagefright detector app (Zimperium): All my smartphones are vulnerable.

Hopefully, most of my smartphones are rooted and have Xposed privacy installed, which I hope improve security.

3) Patching:

Via windows 7 (hum, I love it)

After the firmware backups.

I have tried:

3-1 Elephone P6000 (Kitkat 4.4.4)

The patch resolves only 2 vulnerabilities ( vulnerability 1).

I have disabled stagefright in build.prop as explained in XDA, with buildprop editor.

3-2 Siswoo C55: Lollipop 5.1 . Upd 16112015.

I upgrade the released rom 20151023, after having read a german thread. In fact, there was an OTA upgrade, but the later has aborted (update by wlan disbaled).

I install the rom by sfp tool, format+download. Reinstall TWRP custom recovery and Su.

After many trials to install the rom, my conclusions:
– Do not try to install Xposed Framework I cannot install Play store apps anymore.

– Stagefright 1 are resolved but not stagefright 2 (the worst).

– Of course, my IMEI are gone. I have had to enter them manually with eg MTK engineering app.

A thread gives the solutions:
– AT(space)+EMGR …

PNG – 76.4 kb

PNG – 84.9 kb

Upd 16112015: After adding lines setting stagefright to false in build.prop, the Zimperium stagefright detector gives me all patches shown (all grey) (no more green and red highlights). I use another stagefright which gives me as not vultnerable (version 1).

3-3 Mlais MX-Base:

The patch script (XDA) didn’t work, Have to try to push via ADB. Scary.

– A patch has been released by Mlais (Thanks to the forum). V 20151102. The stagefright version 1 and 2 (1st of 2).

PNG – 103.5 kb

PNG – 90.2 kb

Upd 16112015: After adding lines setting stagefright to false in build.prop, the Zimperium stagefright detector gives me all patches shown (all grey) (no more green and red highlights). I use another stagefright which gives me as not vultnerable (version 1).

Upd 26/12/2015: shellshock vulnerability (bash) OK.

3-4) Oukitel U8 (add 16112015): Thanks to the contributors.

I was one the first acquirers (pre-sale), the fingerprint doesn’t work, despite 2 OTA. But, the vulnerabilities must be patched …

The 20151010 update from oukitel has patched stagefright version 1.

After that, i have rooted the device via CWM (Carliv), thanks to ghost45, the package can be found in a wellknown chinese forum, the article is in german, very well explained. ps: cf dualsim spanish web site.

– CWM Caveat: SUpersu zip must be put on external-sd.

– I will use Xposed privacy and take all kown steps for prevention …

PNG – 86.1 kb

PNG – 92 kb

JPEG – 2.7 Mb

4) Others: Kitkat and Lollipop

Well, I have to check for updates (eventually) or DIY.

4-1) Last week, I acquired for a bargain (fidelity) a “major” brand latest smartphone customized by my Telecom provider. I am baffled that nothing has been done, nor not seeing a warning ! Upd 12/11/2015: My Telecom provider send me a message: Very soon, the patch is coming.

I read somewhere that my provider has disabled MMS in their servers. And their german partner (yes, the phone is stamped with their trademark beginning with the letter V…..) has written something like: they are in control … No update will be released for the moment, since there aren’t any real menace bieng reported !!! (cf german forum). As other people said: How could I know, that my infos are leaked or or spied ?). Well, have I to put a sniffer ?

– Upd 20/04/2016: GRA-L09C900B321:
– I update the P8 to Marshmallow v6, by downloading the file from Huawei site, http://huawei-info.de/huawei-p8-off… ([UPDATE] Huawei P8: Offizelles Android 6.0 Marshmallow Update [B321] – inkl. Download OTA & FULL Update ), thanks to androidhilfe.de .
– I was looking at it without really understanding its implication: I was supposed to receive a OTA notice …, since my phone is branded by Vodafone CH. – The phase on the update page does the catch: for all versions of GRA-L09. So the update was possible from GRA-L09C02B191 to GRA-L09C900B321

– The current stagefright 1&2 vulnerabilities are solved.

JPEG – 90.7 kb JPEG – 1.1 Mb

– Upd 26/11/2015: GRA-L09C02B191
— I have updated the P8 (customized for Vodafone CH): OTA version 5.1.1, at last. The stagefright 1 and 1st of 2 stagefright 2 are repaired.
— Just Check for update, download and install (555 MB).

— PS: Just in case, I was prepared to unlock bootloader, aka getting the code as explained in Xda and frandroid forii and do it myself (cf Version GRA-L09xxxx200), cf german forum android-hilfe.de . Thanks to the contributors.

PNG – 119.9 kb

PNG – 154.4 kb

4-2 Samsung gt-i9001 (26/12/2015): ION cm11 rel 8

The only one that has Cyanogenmod: 11-20140622-UNOFFICIAL, 4.4.4, I9001XXKG1, 3.4.94-cyanogenmod-g4d69025 …,cm_ariesve-userbug 4.4.4. Rooted.

PS: There at least 7 updates since then, and Lollipop base …

I stick to this version, and put its sources in Studio to dissect …

Lately I stumbled on shellshock vulnerability (which is bash problem). I was aware of this vulnerabilties in Linux servers and Pcs, but forgot about Android 🙁 .

— To check: shellshock app in Playstore. The gt-i9001 has this vulnerability.

Hopefully, XDADEV is my friend: A patch exists, which is updated regularly. Download the patch zip, extract in ESxplorer, copy bash in its bin directory, rename existing /system/xbin/bash, paste the new bash. And of course check with shellshock. OK.

— Check stagefright vulnerabilities with Zimperium app: only 3 vulnerabilities are patched. PS: CM dates back to 2014.
— I use the manual method to patch in /system/build.prop file. Use stagefright viewer apk to check. No garanty …

PNG – 111.1 kb

PNG – 58 kb

PNG – 89.8 kb

PNG – 47.9 kb

xdadev Ariesve

5) Partial conclusion:

– Make backups
– In install AV
– Install Text blocker
– Use Xposed privacy
– Use Firefox
– Patch manually build.prop
– Don’t open unknown messages.
– Install firewall AFWall+,” bloqueur appel et sms” apps from playstore (upd dec/2015). etc …

Or go to Cyanogenmod. Problem: MTK sources. I read that some sources have been released …

As far as I remember, smartphones from my telecom provider, have never been offered update: – Sony Ericsson Xperia X (pricey)
– Samsung galaxy s plus (this one I converted into Cyanogemod …)

– (Upd 26/12/2015) Use VTS for Android., via Computerworld. It’s opensource. Playstore don’t allow it anymore. https://github.com/nowsecure/android-vts

— VTS for Android seems to be one powertool to detect most of known vulnerabilities; the github is always uptodate.

– (Upd 26/12/2015) Use bluebox, heartbleed …

— VTS for Android detects some stagefright vulnerabilities patched in build.prop as “test error”: Undecided (??).

PNG – 169.8 kb

PNG – 191.3 kb

– (Upd 26/12/2015) Use bluebox, heartbleed …

Wonderful world.

Commentaires

Android Studio 1.5 starter. Draft
Monday 7 December 2015
by philippe Vo cong tri
popularity : 55%

1) Intro:

– This cookbook is written mainly for me.

After hesitating for a very long time, I start to delve into the Android bowels.

Thanks to the many contributors on the web, without who I wouldn’t do anything.

— Equipement:
— – Lenovo PC tower, 2xcore AMD x64, 2gb ram, Windows Vista pro and Linux Ubuntu LTe 14.04 (all uptodate). This PC is “very old”, but reliable.

2) Environment setup:
– I use Linux.
— Download and install Android Studio 1.5 ;
— Download Oracle jdk 1.7 (use Ubuntu guidance vas explained in some threads):
— – I have 2 jdks: openjdk and oracle jdk (the later must be used, otherwise there will be warning in the Studio).

ps: Oracle warns that the 1.7 version is deprecated… By default Android studio sets up SDK 6.

3) My first app:
— Run ./studio.sh
— – Create AVD:Choose Nexus 4 api 21 (Arm), 4.7″ 768×1280 xHDPI, Android 5 Armeabi 7a. No camera, full network,No host GPU, ram 1528 MB etc…
— – Android SDK: Download versions 5.x, 4.x

X86 device won’t run for me. For Intel, there are some necessary tweaks at the BIOS and drivers to add.

Build and run the emulator: Takes some time to show the nexus 4 and logo. I wasn’t able to see the emulated hello world (some threads warn that it would take up to 10mn, parameters tweakings necessary in the Studio).
– After waiting more than 10mn, I try to unlock the simulated device, with the mouse pad, the event log shows “lose event” in red…

ps: Some threads give hints about PC memory and emulated memory amount. I have to try further.

– It is possible to run the app, directly thru the real display device, as . For Linux Ubuntu, I have to install drivers and hookup the real device via USB.

JPEG – 863 kb

Create my first project app: I have nothing to do, just clicking tabs to examine the files … Cf Android studio tutorials (some are very well explained.

eg

http://www.beanslegacy.com/fr/blog/…

http://www.cs.dartmouth.edu/%7Ecamp…

http://developer.android.com/tools/…

http://androiddeveloperspot.blogspo…

http://www.raywenderlich.com/78578/…

http://www.tutorialspoint.com/andro…

http://android-steps.blogspot.ch/20…

— Build APK:

— – Download to my Wiko Goa SD card, install the apk, run:
– Screenshot of My Application4 running on Goa:


PNG – 15.7 kb

– Screenshot showing the icon My Application4

PNG – 62 kb

:

Commentaires